There are many different variations of Budd Orr's WGP Autococker today.  Many different Paintball Manufacturers have thier variation of the Autococker which usually emphasizes apperance (anodizing, designs, and cuts), performance (parts, low pressure porting, etc), as well as quality.  Check-It has a variation called the Prococker which is relatively simple, but with overwhelming performance.

So What Does it Come With?

The Body

        Each prococker comes in your choice of anodization (as long as it is possible to do).  It comes with Shark Gills on the back top, and a slot(s) cut on the bottom.  You can also get customized milling if you desire.  You can get the Check-it back block (standard, or with horn cuts), the vertical ASA, and STO front block in either the same color of anodization, black, or chrome plated for the sleek "pro player" look.  The body is also low pressure ported to allow you to operate the gun between 250-300 PSI

Internals

        To start off, the internals are replaced with a lighter valve, Check-It's stainless steel "Ultimate Seal", and a stainless hammer and velocity adjuster.  Lighter springs are put in to allow the Prococker to operate at a lower pressure, allowing less stress on your internals, caused by operating the gun at much higher pressures.

Pnuematics

        All of the parts on the front block are replaced.  ANS' Rock and Ram, in your choice of colors (at least what is available from ANS) are put on for smooth operation.  The front block screw, is replaced with Check-It's Low Pressure Chamber, which also helps in providing the ulitmate in low pressure cockers.  The 3-way, is replaced with Check-It's famous stainless steel version (which is internally hand bored to a perfect fit), which comes standard on the Prococker.  A Pro-team low pressure vavle is mounted on the bottom of the front block, to allow you to read your pressure while adjusting the gun for ultimate performance.

The Rest

        The bolt is a lightened Hourglass Venturi which is made from lightened aluminum.  A chrome ball detent is also provided.  You can also choose your choice of barrels to accompany your  prococker.  A choice of bottom lines are available, depending on what type of air system you choose to run on the gun.  The 1" drop forward, or the 2" Tuc-Tite from Check-It are both available in either gloss black, or chrome plate.

Performance

        Each prococker is assembled, lubed, and timed, by Check-It's qualified staff.  Each gun is hand assembled, nurtured, and tested for flawless operation.  The procockers trigger pull, etc., are custom fitted to the owner's desire, and doesn't leave the store until that they are completely satisfied.

Your Assurance

Check-It's friendly and knowledgeable staff is willing to help whenever you have problems, questions, or just want to stop by to see what new products we have available.  Check-It's policy is to make sure that you are completely satisfied, by owning one of the best Autococker variations on the market today.
 

Sean Takeda
MPN Columnist