Check-It has much to offer Kingman's Spyder line of paintball markers.  Barrels were the start, bringing a variety of lengths to help improve your accuracy.  Now, Check-It offers a whole new line of upgrades to make your Spyder the talk of the town....

New Assault Block Kit - MSRP $39.95

Replaces stock block from Kingman (fits Black Draguns as well).  CIP's new Assault Block offers a 15 degree angle for a gas-through grip or regulator for ultimate ergonomic comfort.  Dual Full pressure ported design which allows higher gas flow.  Also comes with stylish Torpedo Tube for that custom look and feel.  Ported on left side for Micro gauge (which is not included).  Available in silver or black.  Average installation time: less than 5 minutes.

Pros:
- Added comfort and durability
- Enhances looks and gas performance
- Can add guage to show pressure in

Cons:
- you don't have one yet!
 

Originally created for the WDP Angels, CIP's Slip Feed Adapters bring the stylish new look to your Spyder, which fits into place with a set screw.  No more broken plastic feeds when you upgrade to these light weight all aluminum feed, available in silver or black (polished one in center is custom).  Average installation time: less than 3 minutes.

Pros:
- Added durability over stock plastic feed
- Enhances looks
 

Cons:
- might not fit older Viewloaders (with wider neck)

Sweet Spot Blade Triggers - MSRP $19.95

These replacement triggers offer ultimate comfort in your trigger pull (also available for Black Draguns), and are being produced for the Spyder electronic guns and frames.  Available in a variety of colors (green, black, blue, red, silver), these triggers also offer a stop screw, which allows you to clean up the "play" in your trigger pull, and can shorten the pull up to 80%.  Make your trigger pull super light, super short and super fast.  Flat front surface adds a diffrent feel to gun. "Walking" your trigger has never been easier.  Be sure not to screw stop screw too far or the microswtich might stop clicking.  Average installation time: less than 10 minutes.
 

        Will fit new Kingman Electronic Frames except AMG.
 

Pros:
- Added durability over stock trigger
- Enhances looks
- Clean up "play" in trigger for shorter, more crisp pull
 

Cons:
- might take a little patience and know how to install

Full Force (MSRP $34.95) and Icepick Bolts (MSRP $39.95)

New Full Force replacement bolt for Spyders (pictured Left) or Black Draguns. Drilled and tapped 10-32 to use with autococker cocking rods. Made from Delrin. Smoother than the stock aluminum bolt. Prevents scarring found in guns using stock parts. Rides on two o-rings around the air inlet, to prevent any air loss. Open face design is great for low pressure operation. Allows the air to flow freely, instead of impeding air flow like the stock venturi design. Installation requires transfer of stock bolt lug and set screw to new bolt.  Same as Check It Black Dragun Full Force Bolt but drilled and tapped 10-32 in back of bolt to accomodate autococker cocking rods or set screws. (Cocking rod not included, utilizes stock bolt pin).  Make sure you screw your cocking rod in straight.  Average installation time: less than 10 minutes.

New Full Force Icepick bolt (pictured right) is made from Delrin. Smoother than the stock aluminum bolt. Prevents scarring found in guns using stock parts. Rides on two o-rings around the air inlet, to prevent any air loss. Open face design is great for low pressure operation. Allows the air to flow freely, instead of impeding air flow like the stock venturi design. Installation requires transfer of stock bolt lug and set screw to new bolt.  Fits on: Spyder TL Plus, Spyder Xtra, Spyder Shutter, Spyder E99, Spyder Flash, Spyder Aggressor, Black Dragun Compact, Black Dragun Standard, Black Dragun LCD, Black Dragun Sniper, Black Dragun Patriot.  Average installation time: less than 10 minutes.
 

Pros:
- Smoother than the stock aluminum bolt, less drag
- Prevents scarring found in guns using stock parts
- Better air efficiency, better for low pressure operation

Cons:
- if you don't already have one.

Velocity Spring Replacement Kit - MSRP $14.95

Stop having to cut and replace your velocity spring when you are shooting to high/low.  When the velocity adjuster just isn't doing the trick, replace your springs with just the right one to get your marker shooting at its maximum capability.  Color coded for ease, spring tensions range from lowest to maximum velocity, with a total of six springs.  These springs will work in all Spyder and Black Draguns.  Average installation time: less than 5 minutes.

Pros:
- Stop having to cut stock springs
- ease of change and color coding

Cons:
- so you have to take out a screw to replace the springs...
 

This drop forward accommodates all hole configurations for all bottomlines and trigger frames (including Spyder Bottomline, Spyder Regulator, Spyder Trigger Frame, Standard Triggerframe & Standard Bottomline). "This is the only drop forward you will ever need", John S - West Covina Check It.  Will also mount CIP's Unimount On/Off System.  Available in Black and Chrome(+$5).  Average installation time: less than 5 minutes.
 

Pros:
- Drops the tank forward for added comfort
- Fits most tank adapters, on/offs

Cons:
- ???